SVP 350 /SVP 350 Plus

 

We are still able to service and install these machines, most of which are still are not even halfway through there tube life, in most cases a new screen and full convergence set up is all that is required to bring picture quality up to standard.

 

sales@seleco.co.uk

technicalsupport@seleco.co.uk

 

Note: Common faults on these machines such as staying in standby are easily repaired

 

SVP 350 PLUS
The SVP350PLUS is equipped with an internal 20 watt stereo audio amplifier with treble, bass and balance adjustments and with a digital tuner, that allow the reception of  normal broadcast and cable television programmes (PAL and SECAM B/G standards). The Teletext function can be displayed by means of a TV-like remote control, this machine also has a power jack with a 12 volt DC output supply, that is active only when the projector is ON, for driving a motorised screen or switching off the room lights. All video projectors are equipped with remote control and bracket for ceiling mounting.

PROJECTION
CRT: Three new 7" high resolution CRTs
Lenses: 3 DELTA TAC 4 high resolution
Resolution: More than 700 TV-lines
Brightness: 900 ANSI lumens Peak white
Picture size: 60"-250" diagonal
Installation: either floor or ceiling mounted, front or rear projection

ELECTRONICS
Horizontal scan frequency: 15625 Hz ± 800 Hz
Vertical scan frequency: 50 - 60 Hz autolocked
Bandwidth: 12 MHz
Dynamic focus: Horizontal and vertical
Masking: Horizontal and vertical masking adjustable by remote control
Colour system: quad standard
Convergence type: Manual convergence with 17 adjustments
Keystone elimination: Up to 20°
Test pattern: Eight internal test pattern
Audio: Built-in stereo audio amplifier with 2x20W power output; NICAM plus 2c decoder
Tuner: Electronic hyperband tuner, direct selection of up to 200 programmes with autotuning function
Teletext: TOP, FLOF, Televideo

INPUTS/OUTPUTS
RGB Input: via 5x BNC’s or SCART H/V, V Separate sync., and sync. on green
Video Input 1: via SCART or BNC
Video Input 2: via BNC
S-VHS Input 1: via mini DIN 4-pin
S-VHS Input 2: via SCART
Control of external devices: by 2 power jack outputs with 12 Volt DC, 50 mA max

GENERAL SPECIFICATIONS
Information: On screen display by remote control
Input voltage: 90-270 Vac 48-62 Hz
Power consumption: 220 Watt
Dimensions (WxHxD): 620 x 290 x 700 mm
Net weight: 30 Kg
YCrCb: via 3 BNC

 

 

 

home